Hi Guys!

Some time past since my last update – for good reasons. It’s been quite unclear, if I could continue with my project. I had to rethink the whole thing and came to the point, that I have to reduce my demands on realism, to create progress and to avoid loosing myself in details. The main target is now to get the Sim flyable again very soon.

Temporary, the Sim had to move into my garage for some time and I disassembled the Cockpit floor-construction. It needs to be reworked anyway and in the meantime, I layed some laminate on the floor, to have an even ground for later steps.

Currently, I can present at least one good shot of the current status of my Cockpit!

My Homecockpit by January, 2019

My Homecockpit by January, 2019

Steps that are already in process:

  • Setting up a functional visual! You will have another post regardings this within the next weeks
  • Assembling the Parking-Brake Mechanism and Panel

Stay tuned – and thank you very much for your visit!


3 Comments

Diogo Santos · September 12, 2020 at 10:02 am

Olá Marco
Muitos parabéns pelo trabalho fantástico!!!

Queria iniciar um projecto semelhante e gostava de tirar algumas dúvidas.

Como ficaram os bodyshakers por baixo do chão? Consegue-se sentir bem a vibração??
Instalarias quantos para um dual será cockpit?

Relativamente a cor usada para o chão qual a tua recomendação de forma a ficar o mais semelhante com a realidade? Recomendas algum Supplier?

A parte mais difícil 😬, medidas para a construção de todo o pedestal, MIP e sidesticks, tens alguns desenhas com medidas que tenhas usado? Os teus estão perfeitoS!!

Compras-t o MCDU ou construis-t?

    Marco · September 16, 2020 at 9:30 am

    Hello Diogo, thank you very much for your comment. Unfortunately I haven’t used the bodyshakers until now. My floor construction is currently under rework.
    Look here for the original floor colour: https://soarbywire.com/2018/10/28/floor-panels/
    An idea for the MCDU could be this one: https://upwithoutwings.com/2019/10/24/a-cheap-mcdu/
    Measures for the Main Stand are a very individual thing, as it has to fit with the panels and components you are planning to use. I’m planning to write a post on sources for measures in general soon.

Diogo · September 16, 2020 at 10:10 am

First many thanks for your reply. And once again congratulations for the great forum!

I will first Try to install the bumpers in the chairs to see the effect ;).
Regarding the measurements I will patiently wait for your post.
If you can add some sketch’s with some sizes (oriented dimensions) is going to be fantastic :).

Leave a Reply to Diogo Cancel reply

Your email address will not be published. Required fields are marked *